Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 330)

Configuring SNMP Parameters and Traps
Page 13-10
Get Next Requests
The total number of SNMP Get-Next PDUs accepted and processed by the switch SNMP proto-
col entity.
Set Requests
The total number of SNMP Set-Request PDUs which have been accepted and processed by the
switch SNMP protocol entity.
Get Responses
The total number of SNMP Response PDUs accepted and processed by the switch SNMP proto-
col entity.
Authentication Trap Enables
Indicates whether the SNMP agent Enable process is permitted to generate authentication-fail-
ure traps. The value of this object overrides any configuration information, providing a means
to enable all authentication-failure traps.
Traps
The number of SNMP Trap PDUs generated by the SNMP protocol entity. Traps are broadcast
only.
Traps are broadcast only
This appears if traps are set to broadcast. The address is the broadcast address of the default
VLAN of AutoTracker group 1.
Trap generation is ENABLED to these management stations
This appears if you have used the snmpc command to set up one or more management
stations to receive traps. The trap tables on the following pages list the traps that are currently
supported.