Field descriptions, Display alternate peer summary information, Display alternate peer summary information -17 – Alcatel Carrier Internetworking Solutions Omni Switch/Router User Manual
Page 295
NTP Information Menu
Page 12-17
Field Descriptions
The following sections describe the fields displayed using the
ntppeers
command
Remote
. The
IP
address of the remote association.
Local
. The local interface address assigned by
NTP
to the remote association. If this address is
0.0.0.0
, then the local address has yet to be determined.
St
. The stratum level of the remote peer. If this number is
16
, the remote peer has not been
synchronized.
Poll.
The polling interval, in seconds.
Reach
. The reachability register of the remote association, in octal format. This number is
determined by the
NTP
algorithm.
Delay
. The currently estimated delay of this remote association, in seconds. This time is deter-
mined by the
NTP
algorithm.
Offset
. The currently estimated offset of this remote association, in seconds. This time is deter-
mined by the
NTP
algorithm.
Disp
. The currently estimated dispersion of this remote association, in seconds. This time is
determined by the
NTP
algorithm.
Display Alternate Peer Summary Information
The
ntpdmpeers
command displays a more detailed version of the
ntpshowpeer
command with
a slightly different output than the
ntppeers
command. To display a list of peers that includes
summary information, enter the
ntpdmpeers
command at the system prompt. A screen similar
to the following appears:
remote
local
st
poll
reach
delay
offset
disp
======================================================================
+ 1.1.1.1
0.0.0.5
16
64
0
0.00000
0.00000
16.0000
+ 1.1.1.2
0.0.0.5
1
64
0
0.00000
0.00000
16.0000
* 1.1.1.3
0.0.0.5
2
64
0
0.00000
0.00000
16.0000
This table is identical to the
ntppeers
command except for the symbols displayed on the far
left side. A key for the symbols is provided below:
.
Indicates that the remote association was cast aside during the false ticker
detection.
+
Indicates that the remote association was accepted and not discarded by
the false ticker detection.
*
Indicates the remote association the switch is currently synchronizing with.