Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 1010)

Viewing T1 Remote Statistics
Page 33-22
Clearing the Framer Statistics for a T1/E1 Port
The tecls command enables you to clear the accumulated physical-layer (Framer) statistics for
a T1 or E1 port. To clear statistics, enter
tecls /
where is the slot number where the board is located, and is the port number on
the board on which you want to clear statistics. For example, to statistics for Port 2 on the
board in slot 5, enter
tecls 5/2
Once the statistics have been cleared, the following message will be displayed:
Statistics of port 5/2 have been cleared.