Viewing slot data, Viewing slot data -14 – Alcatel Carrier Internetworking Solutions Omni Switch/Router User Manual
Page 236
![background image](/manuals/39732/236/background.png)
Viewing Slot Data
Page 9-14
Viewing Slot Data
You can view slot table information by entering the
slot
command. To view information on a
particular slot, enter the
slot
command together with the slot number. For example, to view
information for slot 1, enter
slot 1
at the system prompt. You can also view information on all slots in the switch at the same
time in a table. To view data, for all slots in the switch, enter
slot
at the system prompt. A table similar to the following will be displayed.
Module-Type
Adm-Status
HW
Board
Mfg
Firmware-Version
Slot
Part-Number
Oper-Status
Rev
Serial #
Date
Base-MAC-Address
-------
----------------------------------------------------------------------------------------------------------------------------
1*
MPM
Enabled
L3
52601675
01/05/01
4.305002600 Operational
00:20:da:04:21:f0
2
HSM
Enabled
B11
53404264
01/19/01
4.3 05003106 Operational
00:20:da:02:28:60
2-1
FDDI
D
53404104
01/24/01
05003706
3
HSM
Enabled
Enabled
L
53404645
01/21/01
4.3 05003106 Operational
00:20:da:04:87:30
3-1
ATM
B
53404116
01/11/01
05004400
4
Ether/8
Enabled
D
53404229
01/07/01
4.3 05000014 Operational
00:20:da:03:09:90
5
F-Ether/M
Enabled
A5
73250839
01/07/01
4.3 05015906 Operational
00:20:da:85:40:50
The fields display by the
slot
command are described below.
Slot
. The slot number for the
MPX
or switching module.
Module-Type
. The type of module in this slot.
Part-Number
. The factory-assigned part number.
Adm-Status
. The administration status. This can be enabled or disabled by the operator
through the
reset
command, which is described in Chapter 36, “Running Hardware Diagnos-
tics.”
Oper-Status
. The operational status. Whether the port is Up (Operational), Down, or
Unknown. (Unknown means uninitialized or that the module is in a transitional state.)
HW Rev
. The revision number for this module. This number may be helpful when trouble-
shooting.
Board Serial #
. Serial number for this module.
Mfg Date
. The manufacturing date for this module.
Firmware-Version
. The version of the module’s firmware. All modules should use the same
version of software.
Base-MAC-Address
. The base
MAC
address(es) of this module.