Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 181)

Loading a File From the Primary MPX
Page 6-17
Loading a File From the Primary MPX
The mpmget command loads a file from the primary MPX and copies it into the secondary
MPX . This command is only available and can only be run from a secondary MPX . To use this
command, enter mpmget , followed by a space, a slash ( / ), the name of the flash directory,
another slash ( / ), and the name of the file you want to transfer.
For example, to load the file mpm.log from the /flash directory on the primary MPX to the
secondary MPX you would enter
mpmget /flash/mpm.log
at the system prompt. After a brief moment, the file will be transferred into the secondary
MPX. The following would then be displayed.
Transferring .. Complete