Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 1022)

Backup Services Commands
Page 34-12
Viewing Backup Service Statistics
To view the statistics of a back service, enter the bsstatus command in the following manner:
bsstatus b
where b is the service index number assigned to the service when it was
created. For example, to see the statistics for a backup service with an index number of 1,
enter:
bsstatus b1
A screen similar the following displays:
Status for Backup Index: 1.
Current State
:Primary Up
Number of Times Primary Port Disconnected :0
Number of Times Backup Port Disconnected :0
Number of Times Backup Port Initiated :0
Number of Times Backup Port Connected :0
Number of Times Primary Port Connected :0
As a variation of this command, enter the bsstatus command without specifying the service
index number. A screen displays showing all backup services on the switch, as shown:
Slot/
Primary Port/ Bkp Peer Current.
Idx Description Type Dlci/ Type Id State
==== =============== ===== ===== ===== ===== ==========
1 Port 5/1/0 Peer 1 Primary Up
Current State . The current state of the backup service. The options for this are Primary Up ,
Primary Down , Backup Up , Backup Down , Backup Initiated .
Number of Times Primary Port Disconnected . The number of times the primary port has discon-
nected since the last clearing of statistics for this service.
Number of Times Backup Port Disconnected . The number of times the backup port has discon-
nected since the last clearing of statistics for this service.
Number of Times Backup Port Initiated . The number of times the backup port has been activi-
ated since the last clearing of statistics for this service.
Number of Times Backup Port Connected . The number of times the backup port has connected
since the last clearing of statistics for this service.
Number of Times Primary Port Connected . The number of times the primary port has connected
since the last clearing of statistics for this service.