Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 188)

Displaying the Current Directory
Page 7-2
Displaying the Current Directory
To display the switch’s current directory, enter
pwd
at the system prompt. The working directory will be the /flash memory system and the corre-
sponding directory information will be displayed:
/flash
Configuration and Log File Generation
The mpm.cnf , mpm.cfg , and mpm.log files are generated automatically by the switch and placed
in flash memory during the boot process; you do not have to load them.
♦ Important ♦
If you remove the configuration files ( mpm.cnf and
mpm.cfg ) from your switch, all of your switch’s non-
default configuration settings will be deleted at the next
boot sequence. Use caution when removing configura-
tion files and be sure to create backup copies if you
want to safeguard your current configuration.
Changing Directories
You can change the working directory with the cd command. For example:
cd test
at the system prompt. To change the working directory back to /flash file system, enter
cd flash
at the system prompt.