Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 327)

Configuring SNMP Parameters and Traps
Page 13-7
Please note that any additional NMS entries must have a unique IP address. Repeat steps b
through f to continue configuring additional NMS entries. Once you save your configura-
tion and re-enter the snmpc command at the prompt, the screen refreshes to include the
new NMS entry. The following is a sample display:
SNMP current configuration:
1) Process SNMP Packets - enabled
2) Utilization Threshold - 60%
3) Set Community Name - public
4) Get Community Name - public
5) Trap Community Name - public
6) Broadcast Traps - disabled
7) 1 Unicast Traps - enabled
8) NMS IP address - 123.12.1.1 /162 -- ffffffff:bfffffff (on) (SA
-- ffffffff:fffffffff)
9) NMS IP address - 123.22.2.2 /162 -- ffffffff:ffffffff (on)
-- ffffffff:fffffffff
(save/quit/cancel)
:
g. To delete an IP address added to this list, enter the NMS index number of the entry
followed by the decimal ( . ) character. The following example would delete the NMS IP
address listed at number 9 .
9=.