Alcatel Carrier Internetworking Solutions Omni Switch/Router - Manual (Page 229)

Displaying Basic System Information
Page 9-7
No. of Resets to the System . The number of times this switch has been reset since the last cold
start.
♦ Note ♦
The info command will also display the number of
MPXs , their location in chassis, and which one is the
primary and which one is the secondary. In addition, it
also displays whether automatic configuration synchro-
nization is enabled. See Chapter 6, “Configuring
Management Processor Modules,” for more information
on redundant
MPXs and automatic configuration
synchronization.
System Base MAC Address . The base MAC address for the primary MPX in chassis.
Number of Free Slots . The number of slots not occupied by a module.
Action on Cold Start . The action taken when you switch the power on.
Action on Reset . The action taken when you reboot.
Script File . The name of the command file ( mpx.cmd is the default) containing user-config-
urable commands.
Boot File . The boot file ( mpx.img is the default) used by the switch when it boots up or
reboots.
Ni Image Suffix . The name of the file extension ( img is the default) indicating that the file is an
executable binary file. See Chapter 6, “Configuring Management Processor Modules,” to
change this suffix.