Yokogawa µR10000 Instruction Manuals and User Guides
We have 8 Instruction Manuals and User Guides for µR10000 Yokogawa
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 65 |
| Size: | 1.77 MB |
Show table of contents
Document Outline
- Foreword
- Products Described in This Manual
- Terms and Conditions of the Software License
- Checking the Contents of the Package
- How to Use This Manual
- Contents
- Chapter 1 Before Using the Software
- Chapter 2 Configuring the Recorder
- 2.1 Starting/Closing the Software and Showing Version Information
- 2.2 Setting the Communication Mode for Connecting to the Recorder
- 2.3 Loading the Setup Data or Creating New Setup Data
- 2.4 Setting the Measurement Channels
- 2.5 Setting the Computation Channels (/M1 Option)
- 2.6 Setting the Items in Setting Mode and the Data Display Method
- 2.7 Setting the Items in Basic Setting Mode
- 2.8 Checking the Consistency of the Settings
- 2.9 Sending Setup Data to the Recorder
- 2.10 Saving the Setup Data
- 2.11 Printing the Setup Data
- 2.12 Characters That Can Be Used
- Chapter 3 Troubleshooting
- Chapter 4 Using CopyTool
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 27 |
| Size: | 343 KB |
Show table of contents
Document Outline
- Software License Agreement
- How to Use This Manual
- Contents
- Chapter 1 Overview
- Chapter 2 Operating Procedure
- Chapter 3 Details of Functions
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 83 |
| Size: | 4.26 MB |
Show table of contents
Document Outline
- Important Notice to the User
- Trademarks
- Introduction
- Safety Standards and EMC Standards
- Precautions Related to the Protection, Safety, and Alteration of the Product
- Exemption from Responsibility
- Conventions Used in This Manual
- Overview of This Manual
- Contents
- Chapter 1 Principles of Operation
- Chapter 2 Troubleshooting
- Chapter 3 Testing
- 3.1 Acceptance Test
- 3.2 Self Diagnostic Test
- 3.3 Performance Tests
- 3.4 Test Procedures
- Insulation Resistance
- Protective Grounding
- Withstand Voltage
- Measurement Accuracy
- Channel-to-Channel Error
- Burnout Detection
- Reference Junction Compensation Accuracy
- Display
- Keys
- Power Supply Frequency Detection
- Battery Backup
- Recording Accuracy
- Z-Fold Chart Paper Feed Accuracy
- Dead Band (Pen Model)
- Pen Offset (Pen Model)
- Ink Bleed (Dot Model)
- Overscale Amount
- Relay Contact Output
- Remote Control Input
- Loop Back Test (Ethernet Communication Interface, /C7)
- Z-Fold Chart Paper End Detection
- Other Functions in Test Mode
- Chapter 4 Adjustments
- Chapter 5 Schematic Diagram
- Chapter 6 Customer Maintenance Parts List
- Chapter 7 Replacing Parts
- 7.1 Introduction
- 7.2 Replacable Parts
- 7.3 Disassembly
- Door Assembly [Item 1 on pages 6-2 and 6-12]
- Internal Unit - Frame Assembly [Item 5 on pages 6-2 and 6-12]
- CPU Assembly, Battery Assembly [Item 14 on pages 6-4 and 6-14]
- Joint PCB [Item 6 on pages 6-4 and 6-14]
- Chart Paper Feed Motor - Motor Assembly (B9962EJ) [Item 10 on pages 6-5 and 6-15]
- Display Assembly [Item 1 on pages 6-4 and 6-14]
- Dot Driver PCB [Item 7 on page 6-14]
- Ribbon Holder Assembly [Item 18 on page 6-15]
- Ribbon Feed Motor - Motor Assembly (B9962EJ) [Item 10 on page 6-15]
- Swing Gear A and B [Items 11 and 12 on page 6-15]
- Ribbon Shift Motor - Motor Assembly (B9962EJ) [Item 10 on page 6-15]
- Lever Assembly (B9901EK) [Item 26 on page 6-15]
- Pulley Assembly (B9963CJ) [Item 25 on page 6-15]
- Carriage Assembly (B9963CL) [Item 14 on page 6-15]
- Carriage Motor - Motor Assembly (B9963CF) [Item 23 on page 6-15]
- Pen Servo Assembly (B8800FG) [Item 23 on page 6-5],
- Pen Driver PCB [Item 7 on page 6-4]
- Pen Arm Assembly [Items 24 to 27 on page 6-5]
- Pulley Bearing (B9900RP) [Item 17 on page 6-5]
- Plotter X Motor - X Motor Assembly (B8800DT) [Item 20 on page 6-5]
- Carriage Assembly (B8800DJ) [Item 11 on page 6-5]
| Recognized languages: | English |
|---|---|
| Pages: | 9 |
| Size: | 245 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 94 |
| Size: | 5.31 MB |
Show table of contents
Document Outline
- Important Notice to the User
- Trademarks
- Introduction
- Safety Standards and EMC Standards
- Precautions Related to the Protection, Safety, and Alteration of the Product
- Exemption from Responsibility
- Conventions Used in This Manual
- Overview of This Manual
- Contents
- Chapter 1 Principles of Operation
- Chapter 2 Troubleshooting
- Chapter 3 Testing
- 3.1 Acceptance Test
- 3.2 Self Diagnostic Test
- 3.3 Performance Tests
- 3.4 Test Procedures
- Insulation Resistance
- Protective Grounding
- Withstand Voltage
- Measurement Accuracy
- Channel-to-Channel Error
- Burnout Detection
- Reference Junction Compensation Accuracy
- Display
- Keys
- Power Supply Frequency Detection
- Battery Backup
- Recording Accuracy
- Z-Fold Chart Paper Feed Accuracy
- Dead Band (Pen Model)
- Pen Offset (Pen Model)
- Ink Bleed (Dot Model)
- Overscale Amount
- Relay Contact Output
- Remote Control Input
- Loop Back Test (Ethernet Communication Interface, /C7)
- Z-Fold Chart Paper End Detection
- Other Functions in Test Mode
- Chapter 4 Adjustments
- Chapter 5 Schematic Diagram
- Chapter 6 Customer Maintenance Parts List
- Chapter 7 Replacing Parts
| Recognized languages: | English |
|---|---|
| Pages: | 56 |
| Size: | 8.41 MB |
Show table of contents
Document Outline
- Contents
- Safety Precautions
- Handling Precautions
- How to Use This Manual
- Checking the Contents of the Package
- Removing the Packing Materials
- Recorder’s Version and Functions Described in This Manual
- Function Introduction/Names of Parts
- Installing/Wiring the Recorder
- Common Operations and Menu Structure
- Preparing to Record
- Setting the Input Range and Alarm on Measurement Channels
- Recording/Displaying Data
- Starting the Recording
- Stopping the Recording
- Feeding the Chart Paper
- Changing the Chart Speed
- Viewing the Recorded Results
- Description of the Printout Contents
- Switching the Display Screen
- Changing the Displayed Information
- FUNC Key Operations in Operation Mode
- Printing Measured Values (Manual Printout)
- Printing the Recorder Settings
- Clearing the Alarm Printout Buffer
- Printing a Message
- Releasing the Alarm Output (Alarm ACK Operation)
- Activating/Releasing the Key Lock
- Setup Items and Default Values
- Recommended Replacement Periods for Worn Parts
| Recognized languages: | English |
|---|---|
| Pages: | 103 |
| Size: | 1.78 MB |
Show table of contents
Document Outline
- Functional Enhancement of the Recorder
- How to Use This Manual
- Names of Parts and Basic Key Operations
- Contents
- Chapter 1 Overview of the Communication Functions
- Chapter 2 Using the Ethernet Interface (/C7 Option)
- Chapter 3 Using the RS-422A/485 Communication Interface (/C3 Option)
- 3.1 RS-422A/485 Communication Interface Specifications
- 3.2 Terminal Arrangement and Signal Names and the Connection Procedure of the RS-422A/485 Communication Interface
- 3.3 The Bit Structure of One Character and the Operation of the Receive Buffer
- 3.4 Modbus Slave Protocol Specifications
- 3.5 Setting the Serial Interface
- Chapter 4 Commands
- 4.1 Command Syntax
- 4.2 A List of Commands
- 4.3 Parameter Values
- 4.4 Setting Commands
- 4.5 Basic Setting Commands
- 4.6 Control Commands
- 4.7 Output Commands
- 4.8 RS-422A/485 Dedicated Commands
- 4.9 Maintenance/Test Commands (Available when using the maintenance/test server function via Ethernet communications)
- 4.10 Instrument Information Output Commands (Available when using the instrument information server function via Ethernet communications)
- Chapter 5 Responses
- Chapter 6 Status Information
- Appendix
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 263 |
| Size: | 15.69 MB |
Show table of contents
Document Outline
- Recorder’s Version and Functions Described in This Manual
- Safety Precautions
- Checking the Contents of the Package
- How to Use This Manual
- Contents
- Chapter 1 Functional Explanation and Setup Guide
- Chapter 2 Before Using the Recorder
- Chapter 3 Names of Parts and Run Operations
- 3.1 Names of Parts
- 3.2 Installing or Replacing the Chart Paper
- 3.3 Installing/Replacing Felt Pens or Plotter Pen (Pen Model)
- 3.4 Installing/Replacing the Ribbon Cassette (Dot Model)
- 3.5 Starting/Stopping the Recording
- 3.6 Switching the Display Screen
- 3.7 Printing Measured Values (Manual Printout)
- 3.8 Printing the Recorder Settings
- 3.9 Clearing the Alarm Printout Buffer
- 3.10 Printing Messages
- 3.11 Resetting the Report Data of the Periodic Printout
- 3.12 Releasing the Alarm Output (Alarm ACK Operation)
- 3.13 Activating/Releasing the Key Lock
- Chapter 4 Common Operations for Setting Functions and Setup Menu
- Chapter 5 Frequently Used Setup Operations (Setting Mode)
- Chapter 6 Setup Operations for Convenient Functions (Setting Mode)
- 6.1 Setting the Trend Recording Interval (Dot Model)
- 6.2 Setting the Filter (Pen Model)
- 6.3 Setting the Moving Average (Dot Model)
- 6.4 Setting Recording Zones for Each Channel (Zone Recording)
- 6.5 Setting the Partial Expanded Recording
- 6.6 Turning Trend Recording (Dot Model) and Periodic Printout ON/OFF for Each Channel
- 6.7 Setting Tags on Channels
- 6.8 Setting the Message String
- 6.9 Setting the Secondary Chart Speed (Remote Control Function, /R1)
- 6.10 Setting the Alarm Delay Duration
- 6.11 Setting the Brightness of the Display and Internal Light
- 6.12 Applying a Bias on the Measuring Input Signal
- 6.13 Performing Calibration Correction (/CC1 Option)
- 6.14 Setting Up Start Printout and End printout (/BT1 Option)
- 6.15 Setting the Message Format (/BT1 Option)
- 6.16 Setting the Date/Time When Switching between Standard Time and DST
- Chapter 7 Setup Operations for Changing/Adding Functions (Basic Setting Mode)
- 7.1 Changing the Auxiliary Alarm Function
- 7.2 Changing the Integration Time of the A/D Converter
- 7.3 Setting the Burnout Detection Function of Thermocouples
- 7.4 Setting the RJC Function on Channels Set to TC Input
- 7.5 Changing the Channel Recording Color (Dot Model)
- 7.6 Recording by Compensating for the Pen Offset along the Time Axis (Pen Model)
- 7.7 Turning Printouts ON/OFF (Selecting the Channel/Tag Printout and Turning ON/OFF the Channel No., Alarm, Recording Start, New Chart Speed, Scale, and Pen Color Printouts)
- 7.8 Setting the Periodic Printout Interval and the Type of Data to Be Printed
- 7.9 Setting the Bar Graph Display Mode
- 7.10 Setting the Key Lock Function
- 7.11 Enabling the Moving Average Function (Dot Model)
- 7.12 Enabling the Filter Function (Pen Model)
- 7.13 Enabling the Partial Expanded Recording Function
- 7.14 Changing the Display/Printout Language
- 7.15 Enabling the Bias, Low-Cut, Alarm Delay, Calibration Correction (/CC1 Option) Functions
- 7.16 Changing the Time Printout Format
- 7.17 Initializing the Settings
- 7.18 Assigning Functions to the Remote Control Input Terminals (/R1 Option)
- 7.19 Changing the Printout/Display Format of the Date
- 7.20 Selecting to Show/Hide the FUNC Key Menus
- 7.21 Selecting to Show/Hide Setting Mode Menus
- 7.22 Enabling/Disabling the Customized Menu
- 7.23 Setting the Calibration Correction Function (/CC1 Option)
- 7.24 Enabling Start Printout, End printout, and Message Format (/BT1 Option)
- 7.25 Changing the Temperature Unit
- Chapter 8 Setup Operations for Changing the Displayed Contents
- Chapter 9 Operations Related to the Computation Function (/M1 Option)
- 9.1 Starting/Stopping/Resetting the Computation
- 9.2 Setting the Computing Equation
- 9.3 Setting the Unit
- 9.4 Setting the Constants Used in Equations
- 9.5 Setting the Alarm
- 9.6 Specifying the Timer Used in Statistical Calculations (TLOG)
- 9.7 Setting Recording Zones for Each Channel (Zone Recording)
- 9.8 Setting the Partial Expanded Recording
- 9.9 Turning Trend Recording (Dot Model) and Periodic Printout (Including the Printout Using the TLOG Timer) ON/OFF for Each Channel
- 9.10 Setting Tags on Channels
- 9.11 Setting the Alarm Delay Duration
- 9.12 Setting the Timer Used in TLOG Computation and Periodic Printout
- 9.13 Changing the Channel Recording Color (Dot Model)
- 9.14 Changing the Channel Assignments of Recording Pens (Pen Model)
- 9.15 Changing the Type of Report Data Printed in Periodic Printout
- 9.16 Setting the Bar Graph Display Mode
- 9.17 Setting the Procedure Taken When the Computed Result Is in Error
- Chapter 10 Troubleshooting
- Chapter 11 Maintenance
- Chapter 12 Specifications
- Appendix
- Index