Yokogawa µR20000 - Manual (Page 93)

7-18 SM 04P02B01-01E
Carriage Motor (B9906FX) [Item 13 on page 6-20]
1. Remove the internal unit.
2. Remove the cable extruding from the Carriage Assembly from the Dot Driver
PCB (CN8).
3. Remove the three pins and four screws that secure the Plate, then remove the
Plate.
Screw
Screw
Screw
Screw
Plate
Pin
4. Move the Carriage Motor to the right to loosen the Belt tension, then remove the
Belt from the Carriage Motor Pulley.
Belt
Carriage Motor
5. Release the two latches securing the Motor Bracket Assembly, then pull out the
Motor Bracket Assembly.
Latch
Latch
6. Remove the Spring and two screws, remove the Motor Plate Assembly.
(Screw tightening torque: 0.59 to 0.69 N·m).
Spring
Screw
Screw
7.5 Disassembly Procedure (Dot Model)