Port settings, Saving environment settings, Port settings -6 – Yokogawa DAQWORX User Manual
Page 15: Saving environment settings -6, Port settngs, Savng envronment settngs
2-6
IM WX1-08E
Port Settngs
Procedure
1.
Choose Fle > Port No. from the menu bar.
The Port No. dialog box opens.
2.
Enter the port number used to transfer data loaded from a connected device to
DAQLOGGER or Remote Monitor.
Note
The port number need not be changed unless a problem occurs.
Savng Envronment Settngs
Procedure
1.
Click the Save button on the tool bar or choose Fle > Save from the menu bar.
The current settings are saved.
Save button
Note
Be sure to save the environment settings before starting acquisition.
2.2 Enterng Envronment Settngs