Carriage assembly (b8803bb), Pully (b9901ey), Carriage assembly (b8803bb) -16 – Yokogawa µR20000 User Manual
Page 91: Pully (b9901ey) -16, Caution
7-16
SM 04P02B01-01E
Carriage Assembly (B8803BB)
[Item 24 on page 6-20]
Pully (B9901EY)
[Item 30 on page 6-20]
CAUTION
Do not apply lubricant to the Shaft.
1.
Remove the internal unit.
2.
Remove the FPC extruding from the Carriage Assembly from the Dot Driver
PCB (CN6).
3.
Remove the three pins and four screws that secure the Plate, then remove the
Plate.
Screw
Screw
Screw
Screw
Plate
Pin
4.
Remove the screw securing the FPC.
(Screw tightening torque: 0.59 to 0.69 N·m).
Screw
5.
Move the Carriage Motor to the right to loosen the Belt tension, then remove the
Belt from the Carriage Motor Pulley.
Belt
Carriage Motor
7.5 Disassembly Procedure (Dot Model)
This manual is related to the following products: