Yokogawa µR20000 - Manual (Page 40)

4-9
SM 04P02B01-01E
Adjustments
4
Adjusting the Ink Ribbon
● Overview
This is an adjustment of the position of the ink ribbon. The adjustment is performed
when colors of the dots bleed into one another.
● Procedure
1. Press the MENU and CH UP keys while turning ON the power. Menu = A/D
Adjust is displayed.
2. Select Menu = Aux, then press the key.
Menu=Aux
3. Enter the password (see page 3-6), then press the key.
Password=
4. Select Sub = Rib. shift, then press the key.
Sub=Rib. shift
5. Select Rib. shift = Exec, then press the key.
The ribbon shift adjustment pattern starts printing, and the adjustment value
entry screen appears.
Rib. shift=Exec
Purple Red
6. Adjust the numerical value so that the concentration of purple and red is almost
the same.
R.Adjust=17
7. After finding the right adjustment value, press the key.
Saving Adjusted Values
8.
When all adjustments are finished, select Mode = End, then press the key.
Mode=End
9. With End = Store displayed, press the key.
The adjusted value is saved.
End=Store
Concluding Adjustments
10.
Select Menu = End, then press the key. You are returned to the operation
mode.
Menu=End
4.3 Adjustments to the Dot Model
* Select using the key. To enter numerical values, move the cursor to the entry point using the
key. Select the value using the key. You can hold down the SHIFT key while pressing
key or key to reverse the key’s action.