Starting/stopping acquisition from the menu bar, Starting/stopping acquisition from the menu bar -8, Startng/stoppng acquston from the menu bar – Yokogawa DAQWORX User Manual
Page 17
2-8
IM WX1-08E
2.4
Startng and Stoppng Acquston, and Startng
Acquston upon Startup of the Software
Startng/Stoppng Acquston from the Menu Bar
Procedure
Startng Acquston
1.
Click the Start button on the toolbar. Or, choose Montor > Start from the menu bar.
Acquisition on the software is started. The communication status of each device is
displayed under Connected Device Communication Status in the Monitor/Status tab.
Start button
Stop button
Stoppng Acquston
1.
Click the Stop button on the tool bar or choose Montor > Stop from the menu bar.
Startng/Stoppng Acquston from the Montor/Status Tab
Procedure
1.
Click the Montor/Status tab or choose Vew > Montor/Status from the menu bar.
The Monitor/Status tab is displayed.
Select to start acquisition
simultaneously upon startup
of the software
Startng Acquston
2.
Click the Start button.
Communication with the device set up in the Recorder Setting tab starts.
Stoppng Acquston
2.
Click the Stop button.
Communication with the device stops.
Startng the Software and Data Acquston at the Same Tme
Procedure
1
When you turn ON “Start monitor at startup” in the Montor/Status tab, data
acquisition starts according to the saved environment settings the next time (and
simultaneously with) the software is started.