Yokogawa µR20000 - Manual (Page 83)

7-8 SM 04P02B01-01E
7.4 Disassembly Procedure (Pen Model)
Plotter Carriage (B9905NB) [Item 22 on page 6-6]
Plotter Motor (B9905NS) [Item 27 on page 6-6]
Lever Assembly (B9900RH) [Item 39 on page 6-6]
1. Open the internal unit.
2. Remove the Motor Cable extruding from the Plotter Assembly from the Pen
Driver PCB (CN3 and CN4).
3. Remove the two screws securing the Plotter Assembly.
(Screw tightening torque: 0.59 to 0.69 N·m).
Screw
Screw
FPC
Motor Cable
4. Pull out the Plotter Assembly.
5. Remove the screw securing the FPC, then peel the FPC off of the frame (the
FPC and Frame are secured with double-sided tape).
(Screw tightening torque: 0.20 to 0.26 N·m).
Screw
Frame