Yokogawa µR20000 - Manual (Page 48)

4-5
IM 04P01B01-17E
Commands
1
2
3
4
5
6
App
Index
Control Commands
Key Command
Name
Function Execution Mode Administrator User Page
- DS Switches the execution mode. All modes Yes No 4-28
RCD PS Starts/Stops recording. Run mode Yes No 4-28
DISP UD Switches the screen/switches the channel. Run mode Yes No 4-28
FUNC AK Executes alarm acknowledge (AlarmACK) Run mode Yes No 4-28
FUNC TL Starts/stops/resets computation (/M1 option). Run mode Yes No 4-28
FUNC MP Starts/Stops manual print. Run mode Yes No 4-28
FUNC LS Starts/Stops the list (setting information) printout. Run mode Yes No 4-28
FUNC SU Starts/Stops the setup list (basic setting information)
printout.
Run mode Yes No 4-28
FUNC MS Executes the message printout. Run mode Yes No 4-28
FUNC AC Clears the alarm printout buffer. Run mode Yes No 4-28
FUNC MC Clears the message printout buffer. Run mode Yes No 4-29
FUNC VG Resets the report data of the periodic printout. Run mode Yes No 4-29
- YC Initializes the settings. Basic Setting mode Yes No 4-29
- UY Stops the record position adjustment. Basic Setting mode Yes No 4-29
Yes: Command usable
No: Command not usable
Output Commands
Command
Type
Command
Name
Function Execution Mode Administrator User Page
Control
BO Sets the byte output order. All modes Yes Yes 4-29
CS Sets the check sum
(usable only during serial communications).
All modes Yes Yes 4-29
IF Sets the status filter All modes Yes Yes 4-29
CC Disconnects an Ethernet connection
(usable only during Ethernet communications)
All modes Yes Yes 4-30
Setup, measurement, and computation data output
FE Outputs decimal point position, unit information,
and setup data.
All modes Yes Yes 4-30
FD Outputs the most recent measured/computed data. Run mode Yes Yes 4-30
FY Outputs the statistical computation results. Run mode Yes Yes 4-30
FF Outputs FIFO data. Run mode Yes Yes 4-30
IS Outputs status information. All modes Yes Yes 4-31
FU Outputs user information. All modes Yes Yes 4-31
Yes: Command usable
No: Command not usable
RS-422A/485 Dedicated Commands
Command Name Function Execution Mode Administrator User Page
Esc O Opens the instrument. All modes Yes Yes 4-31
Esc C Closes the instrument. All modes Yes Yes 4-31
Yes: Command usable
No: Command not usable
4.2 A List of Commands