Yokogawa µR20000 - Manual (Page 63)

4-9
Using CopyT
ool
1
2
3
4
Index
IM 04P01B01-61E
4.4 Error Messages
If error messages appear, refer to the table below and take the appropriate corrective
action.
No. Message Explanation Corrective Action
E001 Sending file doesn’t exist! The following are possible reasons for the
failure.
1. The file to send does not exist.
2. The file to send was not specified.
Check the set name of the file to send.
E002 xxx (file name)
Cannot create that file!
The following are possible reasons for the
failure.
1. The specified folder does not exist.
2. A file name was not specified.
3. The file name was invalid.
Check the set name of the file to
receive.
E003 Please input the file name! The name of the file to receive was not
entered.
Input the name of the file to receive.
E004 Failed to read file! The following are possible reasons for the
failure.
1. Another program is using the file.
2. The current user does not have access
rights to the file.
3. The file is damaged.
Check the file association. If you
try again and the file still cannot be
loaded, select a different file.
E005 Failed to write file! The following are possible reasons for the
failure.
1. The disc (save destination) is damaged.
2. There is insufficient space in the save
destination directory.
3. Another program is using the file.
4. The current user does not have access
rights to the file.
1. Check whether the disc (save
destination) is damaged.
2. Check the free space in the save
destination directory.
3. Check whether read/write access
has been granted for the relevant file
and folder.
E006 Connection error. Please check
communication setting!
Communication error. Check whether the CopyTool
communication settings match those of
the recorder.
E007 Login failed! The following are possible reasons for the
failure.
1. The user name or password are not correct.
2. The recorder is already connected with
another software program.
1. Check whether the user name and
password match those set on the
recorder.
2. Check whether other software is
communicating with the recorder.
E008 Sending data is not permitted
to the current user level!
The current user does not have permission to
send settings.
Log on with administrator privileges.
E009 Now recording or calculating.
Can’t send settings!
Settings cannot be sent because the recorder
is recording or calculating.
Resend after the recorder stops
recording or calculating.
E010 Send failed! Displayed when sending of the settings fails. Check the connection between the
recorder and computer.
E011 Receive failed! Displayed when receiving of the settings fails. Check the connection between the
recorder and computer.
E012 Failed to send some settings. Displayed when sending of some of the
settings fails.
Check the specifications of the copy
source and copy destination recorders
(number of pens, options, etc.).