Yokogawa µR20000 - Manual (Page 15)

2-2
IM 04P01B01-61E
2.2 Setting the Communication Mode for
Connecting to the Recorder
Set the communication mode and parameters according to the type of connection
between the PC and the recorder.
1. From the Communication menu, choose Communication Setting. You can
also click the Communication Setting icon on the toolbar. The Communication
Setting dialog box opens.
Communication setting icon
2. Set the communication mode and parameters.
When using Ethernet (/C7 option) When using the RS-422/485 interface (/C3 option)
When using the interface unit
When using the interface unit on a model with the
RS-422/485 interface (/C3 option)
3. Click OK.
The dialog box closes, and the communication between the PC and the recorder
is enabled.
Click Cancel to cancel the settings and close the dialog box.
Note
After starting the program, be sure to check the communication settings and click OK.
After the communication settings are checked, Receive setting and Send setting of the
Communication menu become selectable.