Functional enhancement of the recorder, Trademarks – Yokogawa µR20000 User Manual

Page 3

IM 04P01B01-17E

Trademarks

• All the brands or names of Yokogawa Electric’s products used in this manual are

either trademarks or registered trademarks of Yokogawa Electric Corporation.

• Microsoft, MS-DOS, Windows, Windows NT, and Windows XP are either registered

trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries.

• Adobe, Acrobat, and PostScript are trademarks of Adobe Systems incorporated.
• For purposes of this manual, the TM and ® symbols do not accompany their

respective trademark names or registered trademark names.

• Other company and product names are trademarks or registered trademarks of their

respective holders.

Functional Enhancement of the Recorder

The functions of the recorder have been added or changed as shown in the figure below.
You can check the system version on the system display. For details, see the µR10000
User’s Manual (IM 04P01B01-01E) or the µR20000 User’s Manual (IM 04P02B01-01E).

Version Suffix Code

Added or Modified Functions

Reference

µR10000 only

1.11

–

(Changed) Expanded the selectable range of alarm values during

linear scaling (including 1-5V and SQRT) to

–5% to 105% of the scale.

Sec. 4.4: SA command

–

(Changed) The procedure to set the start/end date and time of

Daylight Saving Time (DST) has been changed.
The TD command can be used on the µR20000 and

the µR10000 with system version 1.11.
The SS command can be used on the µR10000 with

system version 1.02 or earlier.

Sec. 4.4: TD command

–

(Added)

The printout/display format of the date can be

changed.

Sec. 4.5: XN command

/C3

(Changed) Modbus slave protocol can be used. Two-wire system. Sec. 4.5: YS command

Sec. 3.2

/C7

(Changed) Users with the same user name cannot be registered. Sec. 2.5

Common to µR10000 and µR20000

1.21

-2

(Added)

Language support (German and French).

Sec. 4.5: UL command

/CC1

(Added)

Calibration Correction.

Sec. 4.4: VL command

Sec. 4.5: UQ and UF commands

1.31

–

(Added)

Customized menu.

Sec. 4.5: UG and UH commands

/BT1

(Added)

Header printout.

Sec. 4.4: VH, VC, VP, VA, VM,

and VD commands

Sec. 4.5: UE and XR commands

–

(Added)

Hold registers 40301 to 40348 (floating type

communication.

Sec. 3.4

This manual is related to the following products:

µR10000