Yokogawa µR20000 - Manual (Page 89)

7-14 SM 04P02B01-01E
7.5 Disassembly Procedure (Dot Model)
Ribbon Feed Motor (B9906GL) [Item 22 on page 6-20]
Ribbon Feed Gear (B9906GN, B9901HM, B9901HN) [Items 19 to 21 on page 6-20]
1. Remove the internal unit.
Ribbon Holder Assembly
2. Remove the Ribbon Feed Motor cable from the Dot Driver PCB (CN5).
3. Remove the three pins and four screws that secure the Plate, then remove the
Plate.
Screw
Screw
Screw
Screw
Plate
Pin
4. Remove the latch from the Holder Lock on the left panel, then slide it to the right
side and remove the Holder Lock.
Holder Lock
Latch
Latch