Yaskawa Sigma II Series Servo System - Manual (Page 345)

Sigma II User’s Manual Chapter 8: Ratings and Characteristics
8 - 15
8.1.4 SGMSH Servomotors
Rating and Specifications for Standard Servomotors
SGMSH Standard Servomotor Ratings and Specifications
*1 These specifications and torque-motor speed characteristics are quoted in combination with an
SGDH servo amplifier operating at an armature winding temperature of 20°C.
mm
110 +0.000 -0.035
19
+0.000 -0.013
22
114.3 +0.000 -0.025
35 +0.01 -0.00
42 +0.000 -0.016
• Time Rating: Continuous • Insulation Class: Class F
• Vibration Class: 15µm or below • Withstand Voltage:
1500V
ac
for one minute (200V specification)
1800V
ac
for one minute (400V specification)
• Insulation Resistance: 500V
DC
,
10M Ω minimum
• Ambient Temperature: 0 to 40°C • Enclosure: Totally enclosed, self-cooled,
IP67 (except for through-sections of the shaft)
• Excitation: Permanent magnet • Ambient Humidity: 20% to 80% (with no
condensation)
• Mounting: Flange method • Drive Method: Direct drive
Voltage 200V
Servomotor Model
SGMSH-
10A A 15A A 20A A 30A A 40A A 50A A
Rated Output *1 kW 1.0 1.5 2.0 3.0 4.0 5.0
Rated Torque *1
lb-in 28.2 43 56.4 87 112 140
N-m 3.18 4.9 6.36 9.8 12.6 15.8
Instantaneous Peak Torque *1
lb-in 84.4 130 169 260 336 422
N-m 9.54 14.7 19.1 29.4 37.8 47.6
Rated Current *1 A
rms
5.7 9.7 12.7 18.8 25.4 28.6
Instantaneous Maximum Current *1 A
rms
17 28 42 56 77 84
Rated Speed *1 rpm 3000
Maximum Speed *1 rpm 5000
Torque Constant
(lb-in)/A
rms
5.63 4.97 4.81 5.07 4.69 5.31
(N-m)/A
rms
0.636 0.561 0.544 0.573 0.53 0.60
Moment of Inertia
lb-in-s 2
x 10 -3
1.54 2.19 2.82 6.20 8.50 10.90
kg-m 2 x 10 -4 1.74 2.47 3.19 7.00 9.60 12.3
Rated Power Rating *1 kW/s 57.9 97.2 127 137 166 202
Rated Angular Acceleration *1 rad/s
2 18250 19840 19970 14000 13160 12780
Inertia Time Constant ms 0.87 0.74 0.62 0.74 0.65 0.59
Inductive Time Constant ms 7.1 7.7 8.3 13.0 14.1 14.7
Specified Tolerances
Dimension Φ LB Φ S
Unit Diameter Tolerance Diameter Tolerance