Yaskawa Sigma II Series Servo System - Manual (Page 310)

Sigma II User’s Manual Chapter 7: Using the Digital Operator
7 - 36
Pressing the DATA/ENTER key after the above displays in steps 3 to 5 will also
return to the auxiliary function mode display.
This completes checking motor type procedure.
Using the Built-in Panel Operator
1. Press the MODE/SET key to select the auxiliary function mode.
2. Press the Up Arrow or Down Arrow key to select the parameter Fn011.
3. Press the DATA/SHIFT key for a minimum of one second to display the
servomotor model and voltage code.
4. Press the MODE/SET key to display the Servomotor capacity.
5. Press the MODE/SET key, and the encoder type and resolution code will be
displayed.
Voltage Servomotor Model
Code Voltage Code Servomotor Model
00 100V
AC
or 140V
DC
00 SGMAH
01 200V
AC
or 280V
DC
01 SGMPH
02 400V
AC
or 560V
DC
02 SGMSH
03 SGMGH- A (1500rpm)
04 SGMGH- B (1000rpm)
05 SAGMDH
06 SGMUH
SGDM-
MODE/SET DATA/
CHARGE POWER
SERVOPACK
200V YASKAWA
Servomotor Mode Voltage
Capacity: Displayed value × 10W.
In this example, the capacity is 100W.
Encoder Type Encoder Resolution