HEIDENHAIN TNC 406 - Manual (Page 83)

62 4 Programming: Fundamentals, Files, Program Entry, Spark Erosion, Erosion Tables
4.7 P
ar
amet
ers in the Er
osion T
able
4.7 Parameters in the Erosion Table
You can enter the following erosion parameters in one erosion table:
Meaning Range
Power stage (NR) 25 to 1
Low voltage current (LV) 0 to 99
High voltage current (HV) 0 to 9
Gap voltage (GV) 0 to 99
Pulse-on duration (TON) 0 to 999
Pulse-off duration (TOFF) 0 to 255
Servo sensitivity (SV) 0 to 99 %
Auto jump distance (AJD) 0 to 99.9 mm
Erosion time (ET) 0 to 999 s
Arc sensitivity (AR) 0 to 99
Electrode polarity (P) 0 or 1
High voltage selector (HS) 0 to 99
Wear rate (WR) 0 to 99 %
Surface finish (RA) 0 to 99.9 µm
Stock removal (SR) 0 to 999.999 ccm/min
Two-times gap (2G) 0 to 9.999 mm
Minimum undersize (UNS) 0 to 9.999 mm
Auxiliary parameters (AUX 1 to AUX 6)