3 cr eating and w riting pr ogr ams – HEIDENHAIN TNC 406 User Manual
Page 75

54
4 Programming: Fundamentals, Files, Program Entry, Spark Erosion, Erosion Tables
4.3 Cr
eating and W
riting Pr
ogr
ams
Programming tool movements in conversational
format
To program a block, initiate the dialog by pressing a function key. In the
screen headline, the TNC then asks you for all the information
necessary to program the desired function.
Example of a dialog
Dialog initiation
Enter the target coordinate for the X axis.
Enter the target coordinate for the Y axis, and go to
the next question with ENT.
Enter ”No radius compensation” and go to the next
question with ENT.
Enter a feed rate of 100 mm/min for this path contour;
go to the next question with ENT.
Enter the miscellaneous function M36 ”eroding ON”;
pressing the ENT key terminates this dialog.
The program blocks window will display the following line:
COORDINATES ?
RADIUS COMP. RL/RR/NO COMP. ?
FEED RATE ? F= / F MAX = ENT
MISCELLANEOUS FUNCTION M ?
3 L X+10 Y+20 R0 F100 M36
10
20
100
36