HEIDENHAIN TNC 406 - Manual (Page 251)

230 12 MOD Functions
12.1 MOD functions
12.1 MOD functions
Selecting, Changing and Exiting the MOD
Functions
8 Press the toggle key.
8 Select the desired MOD function with the corresponding soft key.
8 Use the horizontal arrow keys to change the setting, or enter a
value.
8 Press the END key to exit the MOD function.
8 Press the toggle key to return to the mode of
operation from which you called MOD.
Overview of MOD functions
The MOD functions provide additional displays and input possibilities.
They are selected with soft keys. The following functions are available:
„
Position Display Types
„
Unit of measurement (mm/inches)
„ System information (NC and software numbers)
„ Set data interface
„ Axis traverse limits
„ Machine-specific user parameters
„
Enter code number
„
Q parameter status in test run or in program run mode of operation