Programming and editing, Test run, 3 modes of oper ation – HEIDENHAIN TNC 406 User Manual
Page 28

HEIDENHAIN TNC 406, TNC 416
7
1
.3 Modes of Oper
ation
Programming and Editing
In this mode of operation you can write your part programs. The
various cycles and Q parameter functions help you with programming
and add necessary information.
Soft keys for selecting the screen layout
Test Run
In the Test Run mode of operation, the TNC checks programs and
program sections for errors, such as geometrical incompatibilities, or
missing or incorrect data within the program. This simulation is
supported graphically in different display modes.
Soft keys for selecting the screen layout
Screen windows
Soft key
Top: program. Bottom: positions
Top left: program. Top right: status
Bottom: positions
Screen windows
Soft key
Top: program. Bottom: positions
Top left: program. Top right: status
Bottom: positions
Left: program. Right: status
Left: program. Right: graphics
Top left: program. Top right: graphics
Bottom: positions
Graphics