5 coor dinat e t ransf or mation cy cles – HEIDENHAIN TNC 406 User Manual
Page 190

HEIDENHAIN TNC 406, TNC 416
169
8.5 Coor
dinat
e
T
ransf
or
mation Cy
cles
16 CYCL DEF 11.0 SCALING
Cancel transformations
17 CYCL DEF 11.1 SCL 1
18 CYCL DEF 7.0 DATUM SHIFT
Reset the datum shift
19 CYCL DEF 7.1 X+0
20 CYCL DEF 7.2 Y+0
21 L Z+100 R0 F MAX M2
End of main program
22 LBL 1
Start of the subprogram for the geometry of the original contour
23 L X-10 Y-10 R0 F MAX M
Pre-positioning in the X/Y plane
24 L Z+2 R F MAX M
25 L Z-5 R F M36
Move to end depth, eroding ON
26 L X+0 Y+0 RL F M
27 L Y+20 R F M
28 L X+25 R F M
29 L X+30 Y+15 R F M
30 L Y+0 R F M
31 L X+0 R F M
32 L X–10 Y–10 R0 F MAX M37
Retract in the X/Y plane, eroding OFF
33 L Z+2 R F MAX M
34 LBL 0
35 END PGM SCALING MM
This manual is related to the following products: