HEIDENHAIN TNC 406 - Manual (Page 260)

HEIDENHAIN TNC 406, TNC 416 239
12.5 Sof
tw
ar
e f
o
r D
ata T
ransf
er
Data transfer between the TNC and TNCremoNT
Ensure that:
„ The TNC is connected to the correct serial port on your PC.
„
The TNCremoNT operating mode is set to LSV2.
„ The data transfer speed set on the TNC is the same as that set on
TNCremoNT.
Once you have started TNCremoNT, you will see a list of all of the files
that are stored in the active directory on the upper section of the main
window
1 . Using the menu items , , you
can change the active directory or select another directory on your PC.
If you want to control data transfer from the PC, establish the
connection with your PC in the following way:
8 Select , . TNCremoNT now receives the
file and directory structure from the TNC and displays this at the
bottom left of the main window
2 .
8 To transfer a file from the TNC to the PC, select the file in the TNC
window with a mouse click and drag and drop the highlighted file
into the PC window
1 .
8 To transfer a file from the PC to the TNC, select the file in the PC
window with a mouse click and drag and drop the highlighted file
into the PC window
2 .
If you want to control data transfer from the TNC, establish the
connection with your PC in the following way:
8 Select , . TNCremoNT is now in server mode.
It can receive data from the TNC and send data to the TNC.
8 You can now call the file management functions on the TNC by
pressing the key PGM MGT, in order to transfer the desired files.
End TNCremoNT
Select the menu items , .
Refer also to the TNCremoNT help texts where all of the
functions are explained in more detail.
1
1
2