HEIDENHAIN TNC 406 User Manual
Page 259

238
12 MOD Functions
12.5 Sof
tw
ar
e f
o
r D
ata T
ransf
er
When you start TNCremoNT for the first time, TNCremoNT
automatically tries to set up a connection with the TNC.
Data transfer between the TNC and TNCremo
Ensure that:
The TNC is connected to the correct serial port on your PC.
The data transfer speed set on the TNC is the same as that set on
TNCremo.
Once you have started TNCremo, you will see a list of all of the files
that are stored in the active directory on the left side of the main
window
1
. Using the menu items
change the active directory or select another directory on your PC.
If you want to control data transfer from the PC, establish the
connection with your PC in the following way:
8
Select
and directory structure from the TNC and displays this at the bottom
left of the main window
2
.
8
To transfer a file from the TNC to the PC, select the file in the TNC
window (highlighted with a mouse click) and activate the functions
8
To transfer a file from the PC to the TNC, select the file in the PC
window (highlighted with a mouse click) and activate the functions
If you want to control data transfer from the TNC, establish the
connection with your PC in the following way:
8
Select
mode. It can receive data from the TNC and send data to the TNC.
8
You can now call the file management functions on the TNC by
pressing the key PGM MGT, in order to transfer the desired files.
End TNCremo
Select the menu items
ALT+X.
Refer also to the TNCremo help texts where all of the
functions are explained in more detail.
1
2