HEIDENHAIN TNC 406 - Manual (Page 167)

146 8 Programming: Cycles
8.4 Er
osion Cy
cles
Cycle 4 SPARK-OUT TIME
The SPARK-OUT TIME cycle determines how long sparking-out
should last.
To enter Cycle 4 SPARK-OUT TIME
Open the cycle directory.
Select Cycle 4.0 SPARK-OUT TIME.
Enter the spark-out time T in seconds (for
example,T = 5 seconds).
Example NC blocks
The defined spark-out time remains effective until you
enter a new Cycle 4, or a new program is selected in a
Program Run mode. Then the spark-out time set in
MP2110 is once again effective.
CYCL DEF 1 GENERATOR
SPARKING-OUT TIME IN SECS. ?
4.0 CYCL DEF SPARK-OUT TIME
4.1 CYCL DEF T=5
5