Corner as datum, 5 d a tu m set ting with a pr obing electr ode – HEIDENHAIN TNC 406 User Manual
Page 52
HEIDENHAIN TNC 406, TNC 416
31
2.5 D
a
tu
m Set
ting with
a Pr
obing Electr
ode
Corner as datum
8
To select the probe function, press PROBING P.
8
Move the probing electrode to a position near the first
touch point.
8
Select the probing direction via soft key, e.g. X+.
8
To probe the workpiece, press the machine START
button.
8
Position the probing electrode near the second touch
point on the same side.
8
To probe the workpiece, press the machine START
button.
8
Probe two points on the next edge in the same
manner.
8
Datum: Enter both datum coordinates into the menu
window, and confirm your entry with the ENT key.
8
To terminate the probe function, press the END key.
P
X=?
Y=?
X
Y
P
X
Y
This manual is related to the following products: