HEIDENHAIN TNC 406 - Manual (Page 278)

HEIDENHAIN TNC 406, TNC 416 257
13.4 T
e
c
h
nical Inf
o
rm
ation
13.4 Technical Information
The TNC 406/416
Description Contouring control for ram EDM machines with up to 5 axes
Components
„
Logic unit
„ Keyboard
„ CRT
„ Flat screen (only TNC 416)
Data interfaces „ RS-232-C / V.24
„ RS-422 / V.11
„ Expanded data interface with LSV-2 protocol for remote operation of
the TNC through the data interface with the HEIDENHAIN software
TNCremo
Simultaneous axis control for contour
elements „ Straight lines: up to 3 axes
„ Circles: up to 2 axes
„ Helix with C axis interpolation
Background programming One part program can be edited while the TNC runs another program
Graphics „ Test run graphics
File types „ HEIDENHAIN conversational programming
„ Erosion tables
„ Tool tables
„
Datum tables
Program memory Battery buffered for up to 100 files
Capacity approximately 10 000 blocks
(TNC 406) or 20 000 blocks (TNC 416)
TNC Specifications
Block processing time 15 ms/block (4 000 blocks/min)
Control loop cycle time „ TNC 406/416 switchable (2 ms or 4 ms; MP 1700)
Data transfer rate Max. 38 400 baud
Ambient temperature „ Operation: 0° C to +45° C (32° to 113° F)
„
Storage: –30°C to +70°C (–22° F to 158° F)
Traverse range Maximum ± 30 m (1 181 inches)
Traversing speed Maximum 30 m/min (1 181 ipm)
Input range To 1 µm (0.0001 inches) or 0.001°
Control precision 1/16 µm