H3C Technologies H3C SecPath F1000-E - Manual (Page 73)

62
For system information destined to the log host:
• If the character string ends with (l), the information is log information
• If the character string ends with (t), the information is trap information
• If the character string ends with (d), the information is debugging information
For system information destined to other destinations:
• If the time stamp starts with a percent sign (%), the information is log information
• If the time stamp starts with a pound sign (#), the information is trap information
• If the time stamp starts with an asterisk (*), the information is debugging information
serial number
This field indicates the serial number of the device that generates the system information. It is displayed
only when the system information is sent to a log host in the format of UNICOM.
source
This optional field identifies the source of the information. It is displayed only when the system information
is sent to a log host in H3C format. It can take one of the following values:
• Slot number of a card
• IRF member ID
• IRF member ID and card slot number
• IP address of the log sender
content
This field provides the content of the system information.
Information center configuration task list
Task Remarks
Outputting system information to the console Optional
Outputting system information to the monitor terminal Optional
Outputting system information to a log host Optional
Outputting system information to the trap buffer Optional
Outputting system information to the log buffer Optional
Outputting system information to the SNMP module Optional
Outputting system information to the Web interface Optional
Saving system information to the log file Optional
Saving security logs into the security log file Optional
Enabling synchronous information output Optional
Disabling a port from generating link up/down logging information Optional