H3C Technologies H3C SecPath F1000-E - Manual (Page 190)

179
Displaying help information
This configuration task will display a list of all commands or the help information of an SFTP client
command, such as the command format and parameters.
To display a list of all commands or the help information of an SFTP client command:
Step Command Remarks
1. Enter SFTP client view.
For more information, see " Establishing a
connection to the SFTP server ."
Execute the command in
user view.
2. Display a list of all commands
or the help information of an
SFTP client command. help [ all | command-name ] N/A
Terminating the connection to the remote SFTP server
Step Command Remarks
1. Enter SFTP client view.
For more information, see
"
Establishing a connection to the
SFTP server ."
Execute the command in user view.
2. Terminate the connection to
the remote SFTP server and
return to user view.
• bye
• exit
• quit
Use any of the commands.
These three commands function in
the same way.
SFTP client configuration example
Network requirements
As shown in Figure 82 , an SSH connection is required between SecPath and Router. SecPath, an SFTP
client, needs to log in to Router for file management and file transfer. Use publickey authentication and
the RSA public key algorithm.
Figure 82 Network diagram
Configuration procedure
NOTE:
During SFTP server configuration, the client's host public key is required. Use the client software to
generate RSA key pairs on the client before configuring the SFTP server.
1. Configure the SFTP client.