beautypg.com

System information formats – H3C Technologies H3C SecPath F1000-E User Manual

Page 70

background image

59

Output

destination

Modules

allowed

LOG TRAP

DEBUG

Enabled/

disabled Severity

Enabled/d

isabled

Severity

Enabled/d

isabled

Severity

Log buffer

All

default
modules

Enabled Information Disabled Debug Disabled Debug

SNMP
module

All
default

modules

Disabled Debug

Enabled Information Disabled

Debug

Web
interface

All
default

modules

Enabled

Debug Enabled

Debug Disabled

Debug

Log file

All
default
modules

Enabled

Debug Enabled

Debug Disabled

Debug

System information formats

The following shows the original format of system information, which may be different from what you see.
The actual system information format depends on the log resolution tool you use.
The format of system information varies with the output destinations.

If the output destination is not the log host (such as console, monitor terminal, logbuffer, trapbuffer,
SNMP, or log file), the system information is in the following format:

timestamp sysname module/level/digest:content

For example, a monitor terminal connects to the device. When a terminal logs in to the device, the
log information in the following format is displayed on the monitor terminal:

%Jun 26 17:08:35:809 2008 Sysname SHELL/4/LOGIN: VTY login from 1.1.1.1

If the output destination is the log host, the system information is in one of the following formats:

{

H3C format

timestamp sysname %%vvmodule/level/digest: source content

For example, if a log host is connected to the device, when a terminal logs in to

the device, the following log information is displayed on the log host:

<189>Oct 9 14:59:04 2009 MyDevice %%10SHELL/5/SHELL_LOGIN(l):VTY logged in from

192.168.1.21.

{

UNICOM format

timestamp sysname vvmodule/level/serial_number: content

For example, if a log host is connected to the device, when a port of the device

goes down, the following log information is displayed on the log host:

<186>Oct 13 16:48:08 2000 H3C 10IFNET/2/210231a64jx073000020:

log_type=port;content=Vlan-interface1 link status is DOWN.

<186>Oct 13 16:48:08 2000 H3C 10IFNET/2/210231a64jx073000020:

log_type=port;content=Line protocol on the interface Vlan-interface1 is DOWN.