H3C Technologies H3C SecPath F1000-E - Manual (Page 106)

95
Field Description
Policy ID ID of the interzone policy that a flow match.
Action Action taken against a flow, permitted or denied.
Protocol Type Protocol type of a flow.
Flow Information
Flow information:
• If the protocol type is TCP or UDP, the displayed flow information is source IP
address:source port-->destination IP address:destination port, for example,
1.1.1.2:1026-->1.1.2.10:69.
• If the protocol type is ICMP, the displayed flow information is source IP
address-->destination IP address,ICMP type (ICMP code), for example,
1.1.1.2-->1.1.2.10, echo(8).
• If the protocol type is another type except these three, the displayed flow
information is source IP address-->destination IP address, for example,
1.1.1.2-->1.1.2.10.
Displaying user logs
To display user logs through the Web interface, you must configure outputting user logs to the information
center.
Select Log Report > Report > Userlog from the navigation tree to enter the page for displaying user logs.
If you select the 1.0 option, the user logging 1.0 information will be displayed, as shown in
Figure 41 ; if
you select the 3.0 option, the user logging 3.0 information will be displayed, as shown in Figure 42 .
Figure 41 User logging 1.0 log report