H3C Technologies H3C SecPath F1000-E - Manual (Page 219)

208
Step Command Remarks
3. Use an ACL to control FTP
clients’ access to the firewall. ftp server acl acl-number
Optional.
By default, no ACL is used to control
FTP clients’ access to the firewall.
4. Configure the idle-timeout
timer.
ftp timeout minutes
Optional.
30 minutes by default.
Within the idle-timeout time, if there is
no information interaction between
the FTP server and client, the
connection between them is
terminated.
5. Set the file update mode for
the FTP server.
ftp update { fast | normal }
Optional.
Normal update is used by default.
6. Quit to user view. quit N/A
7. Manually release the FTP
connection established with
the specified username. free ftp user username
Optional.
Available in user view.
Configuring authentication and authorization on the FTP server
To allow an FTP user to access certain directories on the FTP server, you need to create an account for the
user, authorize the user to access the directories and configure a password for the user.
Make the following configuration to perform authentication and authorization on a local FTP user. To
authenticate remote FTP users, you need to configure authentication, authorization and accounting
(AAA). For detailed configuration about AAA, see Access Control Configuration Guide.
In local authentication, the firewall checks the entered username and password against those configured
on the firewall. In remote authentication, the firewall sends the entered username and password to the
remote authentication server for authentication.
To configure authentication and authorization for FTP server:
Step Command Remarks
1. Enter system view. system-view N/A
2. Create a local user
and enter its view. local-user user-name No local user exists by default, and the system
does not support FTP anonymous user access.
3. Assign a password
to the user. password { simple | cipher }
password
N/A
4. Assign the FTP
service to the user. service-type ftp
By default, the system does not support
anonymous FTP access, and does not assign
any service. If the FTP service is assigned, the
root directory of the firewall is used by
default.