H3C Technologies H3C SecPath F1000-E - Manual (Page 138)

127
• After the maximum number of entries is reached, no new entry can be created. For the table entry
limits, see Table 25 .
To configure the RMON alarm function:
Step Command Remarks
1. Enter system view. system-view N/A
2. Create an event entry in the
event table.
rmon event entry-number [ description string ]
{ log | log-trap log-trapcommunity | none | trap
trap-community } [ owner text ]
N/A
3. Create an entry in the alarm
table or private alarm table.
• Create an entry in the alarm table:
rmon alarm entry-number alarm-variable
sampling-interval { absolute | delta }
rising-threshold threshold-value1
event-entry1 falling-threshold
threshold-value2 event-entry2 [ owner text ]
• Create an entry in the private alarm table:
rmon prialarm entry-number
prialarm-formula prialarm-des
sampling-interval { absolute | changeratio |
delta } rising-threshold threshold-value1
event-entry1 falling-threshold
threshold-value2 event-entry2 entrytype
{ forever | cycle cycle-period } [ owner text ]
Use at least one
command.
Table 25 RMON configuration restrictions
Entry Parameters to be compared Maximum number of entries
Event
Event description (description string), event type (log, trap,
logtrap or none) and community name (trap-community or
log-trapcommunity)
60
Alarm
Alarm variable (alarm-variable), sampling interval
(sampling-interval), sampling type (absolute or delta), rising
threshold (threshold-value1) and falling threshold
(threshold-value2)
60
Prialarm
Alarm variable formula (alarm-variable), sampling interval
(sampling-interval), sampling type (absolute, changeratio or
delta), rising threshold (threshold-value1) and falling threshold
(threshold-value2)
50
Displaying and maintaining RMON
Task Command Remarks
Display RMON statistics.
display rmon statistics [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any view