H3C Technologies H3C SecPath F1000-E - Manual (Page 59)

48
• Private key: A configuration file encrypted by this kind of key can be decrypted and recognized
only by the local device.
• Public key: A configuration file encrypted by this kind of key can be decrypted and recognized by
all devices supporting this feature.
To enable configuration file encryption:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable configuration file
encryption. configuration encrypt
{ private-key | public-key }
Optional.
Disabled by default, that is, the current
valid configurations are directly saved to
the configuration file.
NOTE:
For the device that supports this feature, you can use the display saved-configuration command instead
of the more command to view the encrypted configuration file, because the latter cannot decrypt the file.
Otherwise, you will be prompted for operation failure or garbled characters.
Saving running configuration in fast mode or safe mode
You can save the running configuration to a configuration file in one of the following modes:
• Fast mode—Use the save command without the safely keyword. The file is saved more quickly but
is likely to be lost if the device reboots or power failure occurs during the process. If the startup
configuration file for the next startup is lost, the device will use the factory defaults the next time it
reboots, and you must re-specify a new startup configuration file for the device (see " Specifying a
startup configuration file to be used at the next system startup ").
• Safe mode—Use the save command with the safely keyword. The file is saved slowly, but the system
retains the configuration file even if the device reboots or a power failure occurs during the process.
The fast saving mode is suitable for environments where the power supply is stable. The safe mode is
preferred in environments where a stable power supply is unavailable or remote maintenance is
involved.
The configuration file name extension must be .cfg.
To save the running configuration:
Task Command Remarks
Save the running configuration to the specified
file, but the configuration file will not be set as
the file for the next startup.
save file-url
Use either command
Available in any view.
Save the running configuration to the root
directory of the storage medium and specify
the file as the startup configuration file that will
be used at the next system startup.
save [ safely ] [ force ]