H3C Technologies H3C SecPath F1000-E - Manual (Page 203)

192
Figure 95 Creating VD_B
Adding interfaces to the virtual devices
1. Select Device Management > Virtual Device > Interface from the navigation tree to enter the page
shown in Figure 96 .
Figure 96 Adding interfaces to VD_A and VD_B
2. Find GigabitEthernet 0/1 in the Interface Member column and select VD_A from the
corresponding Virtual Device list.
3. Find GigabitEthernet 0/2 from the Interface Member column and select VD_B from the
corresponding Virtual Device list.
4. Click Apply.
Adding VLAN members to the virtual devices
1. Add VLAN members to VD_A:
a. Select Device Management > Virtual Device > VLAN from the navigation tree to enter the page
shown in
Figure 97 .
b. Find VD_A from the Virtual Device column.
c. Click the corresponding icon in the Operation column.
d. Enter VLAN ranges "100-205, 300-310".
e. Click Apply.