H3C Technologies H3C SecPath F1000-E - Manual (Page 52)

41
startup saved-configuration new-config.cfg
boot-loader file soft-version2.bin main
reboot
2. Configure the SecPath firewall:
# Log in to the FTP server.
ftp 2.2.2.2
Trying 2.2.2.2 ...
Press CTRL+K to abort
Connected to 2.2.2.2.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(2.2.2.2:(none)):aaa
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Download auto-update.txt from the FTP server.
[ftp] ascii
[ftp] get auto-update.txt
# Download the startup configuration file from the FTP server.
[ftp]get new-config.cfg
# Download the software upgrade file from the FTP server.
[ftp] binary
[ftp] get soft-version2.bin
[ftp] bye
# Change the extension of auto-update.txt to .bat.
rename auto-update.txt auto-update.bat
# (Optional.) Execute the more command to verify the contents of the files. (Details now shown.)
# Schedule a task for the SecPath firewall to upgrade automatically at 3:00 am.
system-view
[SecPath] job autoupdate
[SecPath-job-autoupdate] view system-view
[SecPath-job-autoupdate] time 1 one-off at 03:00 command execute auto-update.bat
# To verify that the upgrade is successful, use the display version command after the firewall
reboots.
display version
Hotfix configuration example
Network requirements
As shown in Figure 19 , download a patch file from a TFTP server to fix bugs on the firewall.