Figure 97 – H3C Technologies H3C SecPath F1000-E User Manual
Page 204
193
Figure 97 Adding VLAN members to VD_A
2.
Add VLAN members to VD_B:
a.
Select Device Management > Virtual Device > VLAN from the navigation tree to enter the page
shown in
b.
Find VD_B from the Virtual Device column.
c.
Click the corresponding
icon in the Operation column.
d.
Enter VLAN ranges "50-80,400,500-530".
e.
Click Apply.
Figure 98 Adding VLAN members to VD_B
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS