H3C Technologies H3C SecPath F1000-E User Manual

Page 25

Text mode
Original mode

Use the debugging ip icmp command on SecPath and Device B to verify that they can send and

receive the specific ICMP packets, or use the display ip routing-table command to verify the
availability of active routes between SecPath and Device B.

This manual is related to the following products:

H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS