H3C Technologies H3C SecPath F1000-E - Manual (Page 103)

92
Severity level Description Value
Note: A smaller value represents a higher severity level.
Displaying connection limit logs
Select Log Report > Report > Connection Limit Log from the navigation tree to enter the page as shown
in Figure 37 .
Figure 37 Connection limit log configuration page
Table 19 Field description
Field Description
Time/Date Time when a connection limit log is generated.
Type
Type of the traffic alarm, the number of source IP-based connections exceeds the
upper limit or the number of destination IP-based connections exceeds the upper
limit.
Source Zone Source zone of the connection.
Source IP Source IP address of the connection.
Destination Zone Destination zone of the connection.
Destination IP Destination IP address of the connection.
Current Rate Rate of the current connection.
Current Connection Total number of the current connections.
TCP Percentage Percentage of TCP packets to the total packets.
UDP Percentage Percentage of UDP packets to the total packets.
ICMP Percentage Percentage of ICMP packets to the total packets.