Configuring the remote host, N in, Figure 67 – H3C Technologies H3C SecPath F1000-E User Manual
Page 159
148
Figure 67 Network diagram
Configuring the remote host
Windows NT, 2000, XP, and 2003 are shipped with no RSH daemon. The RSH daemon must be
separately obtained and installed on the remote host.
# On the remote host, check that the RSH daemon has been installed and started properly:
1.
From the Windows Control Panel, open the Administrative Tools folder. (For Windows XP, if you
use the category view of the Control Panel window, select Administrative Tools from Performance
and Maintenance.)
Figure 68 Administrative Tools folder
2.
Double-click the Services icon to display the Services window.
Figure 69 Services window
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS