H3C Technologies H3C SecPath F1000-E - Manual (Page 205)

194
Configuring host traffic statistics
Feature and hardware compatibility
Feature F1000-A-EI/E-SI/S-AI F1000-E F5000-A5 Firewall module
Host traffic
statistics
Yes No No No
Overview
The host traffic statistics module monitors the traffic of hosts in a LAN, and sends statistics reports in the
syslog format to the specified log host. From the log information, the administrator can obtain the number
and bytes of service-specific packets sent/received by each host.
To collect statistics for a service, you need to reference the corresponding service resource. The
unspecified network services are taken as one statistics item.
Configuration prerequisites
Before configuring host traffic statistics, you need to:
• Specify the IP address of the log host. For more information, see "Managing logs."
• Specify the service resource. For more information, see Access Control Configuration Guide.
Configuration task list
Task Remarks
Specifying service type
Optional.
Specify the service type for which you want to enable statistics.
You can specify at most 15 service types. If no service type is
configured, all the host traffic will be taken as one service type for
statistics.
By default, no service type is specified.
Configuring basic host traffic statistics
settings
Required.
Enable the host traffic statistics function and configure the statistics
interval.
By default, the host traffic statistics function is disabled.