Pilz PMCtendo DD5.03/000/0/0/0/110-230VAC - Manual (Page 89)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
5-5
5.4 Installing the expansion cards
5 Installation
5.4 Installing the expansion cards 5400 Installing the expansion cards 5- Montage_Erweiterung_DD5
The top of the servo amplifier contains a slot for holding expansion
cards.
Lever the cover off using a suita-
ble screwdriver.
Make sure that no foreign bodies
fall into the open slot.
Remove the small cover grille.
Press the small cover grille back
on to the small part of the slot.
Push the expansion card into the
guide rails.
Do not twist the expansion card as
you insert it!
The expansion card is inserted
correctly when the front rests on
the servo amplifier's mounting
lugs.
Fix the screws in place.