Pilz PMCtendo DD5.03/000/0/0/0/110-230VAC - Manual (Page 68)

4.4 Expansion cards
4 Function description
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-40
4.4.4 Expansion card for DeviceNet
Expansion card for DeviceNet 4- ][Funktion_Erw_DeviceNet_protego_D
The DeviceNet expansion card is available as an accessory.
Fig. 4-14: Front view of DeviceNet expansion card
LED display
The "Net status" LED shows the status of both the expansion card and
the network.
LED Description
Off The device is offline.
- The device has not yet completed the Dup_MAC_ID test.
- The device may not be switched on.
Green The device is online and is running normally. The connec-
tions are established. The device is assigned to a master.
Flashes green The device is online and is running normally. The connec-
tions are not established.
- The device has passed the Dup_MAC_ID test and is online,
but the connections to other nodes are not yet established.
- This device has not been assigned to a master.
- Configuration is missing, incomplete or invalid
Flashes red Recoverable error and/or at least one I/O connection is in
wait status.
Red - An unrecoverable error has occurred on the device. It may
need to be changed.
- Communication device has failed. The device has detected
an error that's preventing communication with the network
(e.g. duplicated MAC ID or BUSOFF).