Pilz PMCtendo DD5.03/000/0/0/0/110-230VAC - Manual (Page 150)

6.8 Expansion cards
6 Wiring
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-60
6.8 Expansion cards 6800 Expansion cards 6-
6.8.1 Expansion card I/O-14/08
Expansion card I/O-14/08 6- ][Verdr_Leiterquerschnitte_Verweis
Under “Connection cables”, please note the requirements for the:
 Cable cross sections
 Insulation material
][Verdr_Erw_I_O_14_8_protego_D
The assignment of the inputs and outputs in the tables below is the de-
fault setting (“Connector pin assignment” table, under “Designation”). It
can be changed at any time in the commissioning software (see chapter
entitled “Function Description” for details of the expansion card).
Connector pin assignment
Connector X11A Pin Designation Description
1 A0 Digital input
2 A1 Digital input
3 A2 Digital input
4 A3 Digital input
5 A4 Digital input
6 A5 Digital input
7 A6 Digital input
8 A7 Digital input
9 Reference Digital input
10 S_fehl_clear Digital input
11 FStart_Folge Digital input
12 FStart_Tipp x Digital input
Connector X11B Pin Designation Description
1 FRestart Digital input
2 FStart_I/O Digital input
3 InPosition Digital output
4 Folge-InPos / PosReg 0 Digital output
5 S_fehl Digital output
6 PosReg1 Digital output
7 PosReg2 Digital output
8 PosReg3 Digital output
9 PosReg4 Digital output
10 PosReg5 Digital output
11 24 VDC Supply voltage 24 VDC
12 I/O-GND Reference earth
34
5
6
12
78
9
10
11
12
X11A
34
5
6
12
78
9
10
11
12
X11B